Hindustan Induction Motors "HIM" Series

You are here

    Home / Hindustan Induction Motors "HIM" Series

Introduction

Hindustan Induction Motors "HIM" Series are efficient design, heavy-duty motor for long run. Designed with class F insulation which make it most preferred choice for heavy duty application, long rn and works even well in toughest conditions.

Features

  • Complete Range 0.25 HP to 25HP
  • CRNO Stampings are used of high quality electric grade for better efficiency and low power consumption.
  • Fitted with pre-lubricated antifriction ZZ bearings of ample size to withstand radial & axial loads.
  • Dynamically balanced aluminium die cast squirrel cage rotor. 
  • Good performance in low voltage and withstand voltage fluctuation.
  • Core components treated with corrosion resistant paint & varnish.
  • Manufactured in quality assurance system compliance with ISO 9001.
  • Designed with class F insulation which make it most preferred choice for heavy duty application, 
  • long run and works well even in toughest environmental conditions
  • V-Ring provided on shaft and terminal box are fitted with a seal to protect the motor from moisture and dust particles. 
  • Temperature rise restricted to class B limit.
  • Customised motor design capability.

 

Applications

  • Industries
  • Agriculture equipments & pumps
  • Fans & blowers
  • Compressors & hydraulic equipments
  • Looms, flour mills, paper mills, Lathe machines etc.

Standard Specifications

Type Single & Three Phase Squirrel cage Induction Motor
Enclosure Totally enclosed fan cooled
Frame size 63 to 180L
Power Range 0.5 HP to 5 HP (Single Phase) | 0.5 HP to 25 HP (Three Phase)
Degree of Protection I.P. 44 (Single Phase) | I.P. 55 (Three Phase)
Class of Insulation F/B
SYN R.P.M. 750 (8 Pole), 1000 (6 Pole), 1500 (4 Pole), 3000 (2 Pole)
Supply Condition 200-240 (Single Phase) 50 Hz ±5% | 400-415 (Three Phase) 50 Hz ±5%
Continuous Duty S-1

Description:

Supply Voltage 415 Volts±10%, 3 Phase, A.C.
Frequency 50 Hz±5%
Combined Voltage & Frequency variations (absolute sum) 10%
Ambient Temperature 50°C
Alititude Upto 1000 Meters above MSL
Relative Humidity Upto 100%
Insulation Class F
Winding Temperature Rise Designed to operate within class Blimit
Duty Continuos (SI)
Protection Class IP55
Motor Feet Integral to motor housing
Terminal Box Position Top of Housing towards drive end
Shaft Extension Single Cylindrical at drive end
Paint Shade Epoxy Paint

Electrical Performance

Single Phase - 4 Pole - 1440 RPM

Sr. No Frame Size Rated Output Speed
(rpm)		 Current
(A)		 Toruge
(Kgm)		 Efficiency Power Factor Ist/Ir
(Ratio)		 Tst/Tr
(Ratio )		 Tpo/tr
(Ratio )
KW HP FL 3/4 L 1/2 L Fl 3/4 L 1/2L
1 80 0.37 0.5 1440 4.0 0.25 66 65 58 0.74 0.64 0.53 3.5 1.9 2.1
2 80 0.55 0.75 1440 5.4 0.37 72.5 72 64 0.84 0.74 0.71 4.7 2.4 2.7
3 90s 0.75 1 1440 6.8 0.50 72.69 69.17 63.52 0.91 0.87 0.8 5.2 3.1 3.25
4 90L 1.1 1.5 1440 9.4 0.75             5.5 2.3 2.6
5 100L 1.5 2 1452 11.70 1.0 76.15 72.72 66.26 0.71 0.65 0.53 4.48 2.95 3
6 112L (Heave Duty) 1.5 2 1452 11.70 1.0 76.15 72.72 66.26 0.71 0.65 0.53 4.48 2.95 3
7 112M 2.2 3 1458 16.5 1.5 77.44 73.42 67.86 0.82 0.76 0.72 3.81 1.75 3
8 132S 3.7 5 1440 30 2.50 83.78 85.16 84.72 0.84 0.81 0.75 4.9 4.8 5.35

Three Phase -2 Pole-2880 RPM

S.No Frame Size Rated Output Speed Current Toruqe Efficiency% Power Factor Ist/Ir(Ratio ) Tst/Tr(Ratio ) Tpo/Tr(Ratio )
    KW HP (rpm) (A) (Kgm) FL 3/4 L 1/2 L FL 3/4 L 1/2 L
1 63 0.18 0.25 2780 0.5 0.06 65 65 58 0.77 0.71 0.57 4.7 2 2.3
2 63 0.25 0.33 2790 0.67 0.09 66 66 60 0.79 0.69 0.57 4.7 2 2.3
3 71 0.37 0.5 2790 0.91 0.13 67 66 61 0.84 0.78 0.68 4.7 2.4 2.7
4 71 0.55 0.75 2815 1025 0.19 72.5 72 64 0.84 0.79 0.71 4.7 2.4 2.7
5 80 0.75 1 2845 1.7 0.26 73.5 72 67 0.84 0.8 0.73 5.5 2.3 2.6
6 80 1.1 1.5 2850 2.3 0.38 77 74 70 0.86 0.82 0.75 5.5 2.3 2.6
7 90s 1.5 2 2860 3.1 0.51 78.5 75 68 0.86 0.77 0.61 6 2.5 3
8 90l 2.2 3 2880 4.3 0.74 81 78.5 72.5 0.88 0.8 0.7 6 2.5 3
9 100l 3 4 2900 5.8 1.01 84 84 82 0.86 0.83 0.75 6 2.5 3
10 100l 3.7 5 2900 7.1 1.24 84 84 82 0.86 0.83 0.75 6 2.5 3
11 112m 4 5.4 2905 7.6 1.34 85 85 82 0.86 0.83 0.76 6 2.5 3
12 112m 5.5 7.5 2905 10 1.84 85.7 85.7 82 0.86 0.86 0.78 6 2.5 3
13 132s 7.5 10 2910 13.3 2.51 87 86 84 0.9 0.87 0.81 6 2.3 2.8
14 132m 9.3 12.5 2915 16.4 3.11 87 87 85 0.91 0.87 0.81 6 2.3 2.8
14 132m 9.3 12.5 2915 16.4 3.11 87 87 85 0.91 0.87 0.81 6 2.3 2.8
15 160M 11 15 2920 20 3.67 88.5 87.5 85.5 0.86 0.84 0.79 6.5 2.2 2.5
16 160M 15 20 2925 26.5 4.99 89.5 88.5 86 0.88 0.86 0.8 6.5 2.2 2.5
17 160L 18.5 25 2930 32 6.15 90 89.5 87 0.89 0.86 0.81 6.5 2.2 2.5
18 180M 22 30 2935 37 7.3 91 90 88 0.91 0.87 0.81 6.5 2.2 2.5

Three Phase -4 Pole-1440 RPM

S.No Frame Size Rated Output Speed Current Toruqe Efficiency% Power Factor Ist/Ir(Ratio ) Tst/Tr(Ratio ) Tpo/Tr(Ratio )
    KW HP (rpm) (A) (Kgm) FL 3/4 L 1/2 L FL 3/4 L 1/2 L
1 63 0.18 0.25 1360 0.57 0.13 60 53 38 0.73 0.58 0.45 3.5 1.9 2.1
2 71 0.25 0.33 1370 0.76 0.18 62 61 53 0.74 0.63 0.47 3.5 1.9 2.1
3 71 0.37 0.5 1380 1.05 0.26 66 65 58 0.74 0.64 0.53 3.5 1.9 2.1
4 80 0.75 1 1434 2.47 0.47 74.57 75.26 71.51 0.55 0.55 0.3 3.9 3.6 3.9
5 90 1.5 2 1422 3.33 1.00 79.74 80.24 78.2 0.76 0.69 0.57 4.6 3.15 3.5
6 100L 2.2 3 1422 4.83 1.50 82.79 83.46 82.27 0.77 0.69 0.59 4.6 3.21 3.58
7 112M 3.7 5 1428 6.87 2.45 83.78 85.16 84.72 0.84 0.81 0.75 4.9 4.8 5.35
8 132S 5.5 7.5 1434 10.49 3.72 84.46 85.25 83.95 0.81 0.76 0.67 5.2    
9 132M 7.5 10 1458 15.69 5.19 85.43 84.79 81.75 0.7 0.67 0.59 5.8    
10 160M 9.3 12.5 1455 17.2 6.23 88 88 87 0.85 0.77 0.66 6 2.2 2.5
11 160M 11 15 1455 20.8 7.36 89 89 87 0.83 0.75 0.66 6 2.2 2.5
12 160L 15 20 1455 27 10.04 90 90.5 89 0.86 0.84 0.75 6 2.2 2.5
13 180M 18.5 25 1460 34 12.34 90.5 90.5 89.5 0.84 0.81 0.74 6 2.2 2.5
14 180L 22 30 1460 39 14.68 91 91 90 0.86 0.82 0.76 6 2.2 2.5

Three Phase -6 Pole-960 RPM

S.No Frame Size Rated Output Speed Current Toruqe Efficiency% Power Factor Ist/Ir
(Ratio)		 Tpu/Tr
(Ratio )		 Tst/Tr
(Ratio )		 Tpo/Tr
(Ratio )
    KW HP (rpm) (A) (Kgm) FL 3/4 L 1/2 L FL 3/4 L 1/2 L
1 71 0.093 0.125 870 0.45 0.1 52 49 40 0.55 0.54 0.33 3   2 2.1
2 71 0.12 0.16 870 0.55 0.13 55 52 41 0.55 0.45 0.34 3   2 2.1
3 71 0.18 0.25 900 0.65 0.19 60 55 42 0.64 0.55 0.38 3   2 2.1
4 71 0.25 0.33 905 0.85 0.27 64 59 44 0.64 0.55 0.38 3   2 2.1
5 80 0.37 0.5 882 1.15 0.39 65.42 66.48 61.34 0.23 0.19 0.15 2.2 2.4 2.12 2.42
6 90s 0.75 1 924 2.49 0.77 73.79 71.22 66.09 0.56 0.48 0.37 2.7 3.3 3.5 3.37
7 100L 1.5 2 948 3.48 1.47 80.86 80.87 78.37 0.68 0.62 0.5 3.4 2.9 2.7 2.87
8 112M 2.2 3 954 4.81 2.31 82.07 81.24 78.76 0.69 0.59 0.48 4 2.83 4.95 5
9 132S 3.7 5 942 8.17 3.79 81.18 82.94 79.75 0.66 0.61 0.5 2.7 2.55 3.29 3.32
10 132M 5.5 7.5 942 12.07 5.75 82.57 83.59 80.94 0.63 0.59 0.49 2.68 2.64 3.4 3.43
11 160M 7.5 10 960 15 7.61 87 87 84.5 0.8 0.76 0.68 5.5   2 2.3
12 160L 9.3 12.5 965 17.5 9.39 88 88 85 0.84 0.81 0.7 5.5   2 2.3
13 160L 11 15 970 20.5 11.05 88.5 88.5 87.5 0.84 0.81 0.7 5.5   2 2.3
14 180L 15 20 970 27.5 15.06 89.5 89.5 88 0.85 0.82 0.72 5.5   2 2.3

Dimensions

Foot Mounted (B3) Motors

S.No Frame Size General Drive End Shaft Non Drive End Shaft
L LC LO AC AD O Cable entry details A B C H K AA AB BB BA HA HD D DB E F GA G DA DC EA FA GC GB
1 63 206 236   124 100 1x0.75" 100 80 40 63 7 27 122 105 27 7 163 11 M4x9 23 4 12.5 8.5 11 M4x9 23 4 12.5 8.5
2 71 240 276   140 105 1x0.75" 112 90 45 71 7 31 134 112 31 8 176 14 M5x12 30 5 16 11 14 M5x12 30 5 16 11
3 80 277 324   158 122 1x0.75" 125 100 50 80 10 32 150 125 32 9 202 19 M6x16 40 6 21.5 15.5 19 M6x16 40 6 21.5 15.5
4 90S 297 354   180 129 1x0.75" 140 100 56 90 10 33 168 124 32 10 219 24 M8x20 50 8 27 20 24 M8x20 50 8 27 20
5 90L 322 379   180 129 1x0.75" 140 125 56 90 10 33 168 149 32 10 219 24 M8x20 50 8 27 20 24 M8x20 50 8 27 20
6 100L 366 433   198 152 2x1" 160 140 63 100 12 43 200 180 46 14 252 28 M10x24 60 8 24 24 28 M10x24 60 8 31 24
7 112M 389 456 230 222 165 2x1" 190 140 70 112 12 49 230 180 47 15 277 28 M10x24 60 8 31 24 28 M10x24 60 8 31 24
8 132S 437 524 257 262 185 2x1" 216 140 89 132 12 52 256 180 48 16 317 38 M12x28 80 10 41 33 38 M12x28 80 10 41 33
9 132M 475 562 260 262 185 2x1" 216 178 89 132 12 52 256 218 48 16 317 38 M12x28 80 10 41 33 38 M12x28 80 10 41 33
10 160M 576 693 354 311 211 2x1" 254 210 108 160 15 64 304 260 60 20 371 42 M16x32 110 12 45 37 42 M16x32 110 12 45 37
11 160L 620 737 354 311 211 2x1" 254 254 108 160 15 64 304 260 60 20 371 42 M16x32 110 12 45 37 42 M16x32 110 12 45 37
12 180M 643 760 381 336 233 2x1" 279 241 121 180 15 65 335 297 101 24 413 48 M16x32 110 14 51.5 42.5 48 M16x32 110 14 51.5 42.5
13 180L 681 798 381 336 233 2x1" 279 279 121 180 15 65 335 335 101 24 413 48 M16x32 110 14 51.5 42.5 48 M16x32 110 14 51.5 37

Foot-Mounted (B56) Motor : Indian Standard

HP/KW ENCL RPM Frame Size A B C D E F GA GD GE H H1 H2 I K L1 L2 01 02 Q V
1.0(90L)/0.75 TEFC 1440 90L 140 125 56 24 50 8 27 4 7 90 178 ­ 284 10 172 158 233 178 43 12
0.5/1.1 TEFC 1440 100L 160 125 63 22 50 8 24.5 3.5 6 100 196 243 328 12 195 170 256 193 48 14
2.0/1.5 TEFC 1440 112M 190 125 70 22 50 8 24.5 3.5 6 112 218 265 335 12 232 180 270 211 41 16
3.0/2.2 TEFC 1440 112M 190 125 70 22 50 8 24.5 3.5 6 112 218 265 335 12 232 180 292 211 101 16

Foot cum Flange (B35) Motors

S.No Frame Size General Foot (B3) Foot (B5) Drive End Shaft Non Drive End Shaft
L LC LO AC AD O Cable entry details A B C H K AA AB BB BA HA HD P max M
PCD		 øN øS Z No. T
Max		 LA D BB E F GA G DA DC EA FA GC GB
1 63 206 236   124 100 1x0.75" 100 80 40 63 7 27 122 105 27 7 163 140 115 95 10 4 3 9 11 M4x9 23 4 12.5 8.5 11 M4x9 23 4 12.5 8.5
2 71 240 276   140 105 1x0.75" 112 90 45 71 7 31 134 112 31 8 176 160 130 110 10 4 3.5 9 14 M5X12 30 5 16 11 14 M5X12 30 5 16 11
3 80 277 324   158 122 1x0.75" 125 100 50 80 10 32 150 125 32 9 202 200 165 130 12 4 3.5 10 9 M6X16 40 6 21.5 15.5 19 M6X16 40 6 21.5 15.5
4 90S 297 354   180 129 1x0.75" 140 100 56 90 10 33 168 124 32 10 219 200 165 130 12 4 3.5 10 24 M8X20 50 8 27 20 24 M8X20 50 8 27 20
5 90L 322 379   180 129 1x0.75" 140 125 56 90 10 33 168 149 32 10 219 200 165 130 12 4 3.5 10 24 M8X20 50 8 27 20 24 M8X20 50 8 27 20
6 100L 366 433   198 152 2x1" 160 140 63 100 12 43 200 180 46 14 252 250 215 180 15 4 4 11 28 M10X24 60 8 31 24 28 M10X24 60 8 31 24
7 112M 389 456 230 222 165 2x1" 190 140 70 112 12 49 230 180 47 15 277 250 215 180 15 4 4 11 28 M10X24 60 8 31 24 28 M10X24 60 8 31 24
8 132S 437 524 257 262 185 2x1" 216 140 89 132 12 52 256 180 48 16 137 300 265 230 15 4 4 12 38 M12X28 80 10 41 33 38 M12X28 80 10 41 33
9 132M 475 562 260 262 185 2x1" 216 178 89 132 12 52 256 218 48 16 317 300 265 230 15 4 4 12 38 M12X28 80 10 41 33 38 M12X28 80 10 41 33
10 160M 576 693 354 311 211 2x1" 254 210 108 160 15 64 304 260 60 20 371 350 300 250 19 4 5 13 42 M16X32 110 12 45 37 42 M16X32 110 12 45 37
11 160L 620 737 354 311 211 2x1" 254 254 108 160 15 64 304 260 60 20 371 350 300 250 19 4 5 13 42 M16X32 110 12 45 37 42 M16X32 110 12 45 37
12 180M 643 760 381 336 233 2x1" 279 241 121 180 15 65 335 297 101 24 413 350 300 250 19 4 5 13 48 M16X32 110 14 51.5 42.5 48 M16X32 110 14 51.5 42.5
13 180L 681 798 381 336 233 2x1" 279 279 121 180 15 65 335 335 101 24 413 350 300 250 19 4 5 13 48 M16X32 110 14 51.5 42.5 48 M16X32 110 1451.5 51.5 42.5

Flange Mounted (B5) Motors

S.No Frame Size General Drive End Shaft Non Drive End Shaft
L LC LO AC AD O Cable entry details P Max M PCD øN øS Z No. T Max LA D DB E F GA G DA DC EA FA GC GB
1 63 206 236   124 100 1x0.75" 140 115 95 10 4 3 9 11 M4x9 23 4 12.5 8.5 11 M4x9 23 4 12.5 8.5
2 71 240 276   140 105 1x0.75" 160 130 110 10 4 3.5 9 14 M5x12 30 5 16 11 14 M5X12 30 5 16 11
3 80 277 324   158 122 1x0.75" 200 165 130 12 4 3.5 10 19 M6X16 40 6 21.5 15.5 19 M6X16 40 6 21.5 15.5
4 90S 297 354   180 129 1x0.75" 200 165 130 12 4 3.5 10 24 M8X20 50 8 27 20 24 M8X20 50 8 27 20
5 90L 322 379   180 129 1x0.75" 200 165 130 12 4 3.5 10 24 M8X20 50 8 27 20 24 M8X20 50 8 27 20
6 100L 366 433   198 152 2x1" 250 215 180 15 4 4 11 28 M10X24 60 8 31 24 28 M10X24 60 8 31 24
7 112M 389 456 230 222 165 2x1" 250 215 180 15 4 4 11 28 M10X24 60 8 31 24 28 M10X24 60 8 31 24
8 132S 437 524 257 262 185 2x1" 300 265 230 15 4 4 12 38 M12X28 80 10 41 33 38 M12X28 80 10 41 33
9 132M 475 562 260 262 185 2x1" 300 265 230 15 4 4 12 38 M12X28 80 10 41 33 38 M12X28 80 10 41 33
10 160M 576 693 354 311 211 2x1" 350 300 250 19 4 5 13 42 M16X32 110 12 45 37 42 M16X32 110 12 45 37
11 160L 620 737 354 311 211 2x1" 350 300 250 19 4 5 13 42 M16X32 110 12 45 37 42 M16X32 110 12 45 37
12 180M 643 760 381 336 233 2x1" 350 300 250 19 4 5 13 42 M16X32 110 14 51.5 42.5 48 M16X32 110 14 51.5 42.5
13 180L 681 798 381 336 233 2x1" 350 300 250 19 4 5 13 42 M16X32 110 14 51.5 42.5 48 M16X32 110 14 51.5 42.5

Material of Construction

Motor Body High grade cast iron
Shaft EN 9/SS AISI 410
Rotor Aluminium Die Casted
Bearings ZZ Deep grove ball bearings to take radial & axial load
Winding Wire E.C. Grade Dual Coated

Enquiry Form

Hindustan Pumps & Electrical Engineering Pvt. Ltd.

  •  13, I.D.C, Kunjpura Road, Near I.T.I. Karnal - 132001, Haryana (India) 
  • +91 184 223 0442
  • +91 184 223 0102
  • info@hindustanpumps.info

Design and Maintained by

Imbibe Technologies Pvt. Ltd.